If you are thinking of installing a new air conditioning system or updating your older unit with a more efficient cooling unit, then split system air conditioner is one of the best options to consider. A split air conditioner has a compressor, which is located outside, and an air outlet unit, which is installed inside. Unlike the system that needs complex ductwork, split system air conditioning unit requires the ductwork only to connect the compressor to air unit. Copper pipes that cycle through the unit to produce either hot or cold air is used to disperse the refrigerant. Split system air conditioning unit is highly efficient. It not only minimizes your energy bills, but also keeps the environment clean.
Important Factors to Consider When Installing Split System Air Conditioner
Installing Split System Air Conditioner:
Improper installation of split system air conditioner can result in 3 things:
- System will not perform as expected. The heating and cooling effect will not meet the actual capacity.
- Due to reduced efficiency, your power bills will increase significantly.
- If the system is not operating the way it was designed to, the added load will reduce the life span of the entire system.
So, keep the following things in mind when installing split system air conditioner at your residence or work place:
- Make sure that you are installing the split air conditioning system on a wall which is strong enough to hold the entire weight of the unit.
- The indoor air unit should have at least 15cm of free space surrounding its top and sides to comfort the air flow.
- The air unit should be installed at a height of 7-8 feet above the ground level to feel the proper cooling effect inside the room.
- To equip the free flow of condensed water from the drain pipe, make sure the aluminum bracket is slightly tilted, which in turn tilts the air unit.
- For efficient cooling, the indoor and outdoor units of split system air conditioner should be away from direct sunlight and water.
- The outdoor unit must be mounted on a horizontal and strong surface. If the surface is not flat, operating parts will get damaged due to excessive vibration leading to breakage and leakage of pipes and compressor.
- Keep a proper distance between indoor and outdoor unit. The refrigerant flows between the indoor and outdoor unit. During this flow, there is always some loss of cooling effect to the environment. So, keep the distance as minimum as possible to reduce the loss of cooling effect.
Benefits of Split System Air Conditioner Unit:
- If your home does not have ductwork, then a perfect cooling solution for you is split system air conditioner as no additional cost is incurred for it.
- The single unit is well suited for a small area providing perfect amount of heating and cooling effect.
- You can expand the air conditioning unit with an additional air outlet for other living space. The only extra fitting required is the copper tubing, which connects air unit to the outside compressor. You can control and set the temperatures of each rooms as you needed using separate thermostats.
The bottom line is to make your investment worthy. Always opt for licensed contractor for regular preventative maintenance of split system air conditioner. If you choose to do it yourself or through non-licensed contractors, you are at the risk of voiding the warranty for your air conditioning unit! Avoided warranty will cause you a lot of repairing cost if your system fails or malfunctions. So, hire an experienced and licensed professional to install and maintain your air conditioning system.